Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE
The adapter can not charge the battery pack. Please
use Greenworks charger to charge the battery pack.
CAUTION
Avoid placing the speaker on wet or dirty surfaces.
8
OPERATION
IMPORTANT
Before you operate the machine, read and understand
the safety regulations and the operation instructions.
8.1
USE YOUR SPEAKER
1. Install the battery pack or connect the power source.
2. Press the ON/OFF button to turn the machine on.
3. Turn on Bluetooth on your Bluetooth enabled device
to choose Greenworks 24V in the list
4. The Bluetooth search button will be steady white if
the pairing succeeds.
5. Press function button to play/pause the audio.
NOTE
If your smart device cannot discover the speaker,
please press and hold Bluetooth search button and
try to pair again.
8.2
AUX CONNECTION
1. Turn on the speaker.
2. Connect an external audio device to the speaker via
3.5 mm audio cable.
3. Press function button to play the audio.
8.3
BROADCAST MODE
This speaker can wirelessly connect to
other Greenworks Bluetooth speakers and play
simultaneously.
1. Power on and connect the principal speaker to your
Bluetooth enabled device.
Once the principal speaker and device connected,
the Bluetooth button turns solid white.
English (Original Instructions)
NOTE
2. Power on a successive speaker and make sure it is
within 1 meter of the principal speaker.
3. Press and hold the function button on the principal
speaker for 3 seconds to enter broadcast mode. The
Bluetooth button will blink green.
4. Press and hold the function button on the
successive speaker for 3 seconds. The Bluetooth
button will blink green.
5. The Bluetooth button on the successive speaker
will turn solid when the connection to the principal
speaker is successful.
When paired using broadcast feature, the speaker
operations (volume, play/pause) will only function on
the principal speaker.
9
MAINTENANCE
WARNING
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.
9.1
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
10
TROUBLESHOOTING
Problem
Possible cause
The speaker
The battery ca-
does not start.
pacity is low.
The on /off but-
ton is defective.
The speaker is
not connected to
power source.
7
NOTE
Solution
Charge the bat-
tery pack.
Contact the serv-
ice center.
Connect the
power source.
EN
Publicidad
