KitchenAid 5KFP1318 Serie Manual Del Propietário página 6

ACCESSORY GUIDE (CONTINUED)
ACTION SETTING
Shred (fine
to medium)
Dice
Knead
NOTE: Do not operate the appliance exceeding a maximum of 3 minutes. After 3 minutes the
appliance needs to cool down to avoid overheating.
PRODUCT ASSEMBLY
Before first use
Before using your Food Processor for the first time, wash all parts and accessories either by
hand or in the dishwasher (see "Care and Cleaning" section).
NOTE: Your Food Processor is designed so that all accessories may be stored inside the Work
Bowl.
1.
Lift up the Lid Latch to unlock the Cover. Tilt the Work Bowl Cover back and lift it straight
up so that the Lid Hinge pulls out of the Handle Hinge.
2.
Remove all parts and accessories from the Work Bowl, and lift the Food Pusher out of the
Feed Tube.
IMPORTANT: Place the Food Processor on a dry, level countertop with the controls facing
forward. Do not plug in the Food Processor until it is completely assembled.
3.
Place the Work Bowl on the Base, aligning the Handle with the raised button on the right
side of the Base. The bowl will click into place and should be flush against the Base when
properly aligned.
4.
Place the Drive Adapter in the Work Bowl, lowering it onto the Drive Pin.
NOTE: For ease of assembly, install the desired Blade or Disc before attaching the Work Bowl
Cover.
5.
To attach the Work Bowl Cover, hook the Lid Hinge into the Handle Hinge on the Work
Bowl and close the Cover.
6.
Once the Work Bowl Cover is closed, the Lid Latch will lock in position.
NOTE: Your Food Processor will not operate unless the Work Bowl Cover is fully closed, the
large Food Pusher is in place, and the Work Bowl is properly seated on the Base.
***For these ingredients it is not recommended to process quantities larger than 384 g.
6
FOOD
Potatoes
1
Vegetables (soft)
Cabbage
Cheese
Chocolate
2
Fruits (hard)
Vegetables (hard)
Potatoes
Vegetables
1
Fruit
Cheese
Yeast
1
Dough
Reversible Fine/Medium Shredding
***
***
ACCESSORY
Disc
Dicing Kit
Dough Blade