Kärcher B 260 RI Combo Manual De Instrucciones página 15

Resetting the maintenance counter
If maintenance work shown in the display has been car-
ried out, the corresponding maintenance counter must
then be reset.
1. Turn the Info button until "Maintenance counter" is
displayed.
2. Press the Info button.
The counter readings are displayed.
3. Turn the info button until the counter to be cleared is
highlighted.
4. Press the Info button.
5. Select "Yes" by turning the Info button.
6. Press the Info button.
The counter is cleared.
Note
The service counter can only be reset by Customer Ser-
vice staff.
The service counter shows the time until the next ser-
vice due by Customer Service.
Resetting the counter
1. Turn the Info button until "Counter" is displayed.
This menu shows the total operating hours and the
day counter.
Delete the day counter:
2. Press the Info button.
The "Delete counter" menu is displayed.
3. Turn the Info button until "Day counter" is highlight-
ed.
4. Press the Info button.
Key management
The authorizations are assigned for each yellow Intelli-
gent Key used and the language of the display is set for
this Intelligent Key in the "Key menu" menu item.
1. Insert the grey Intelligent Key.
2. Turn the info button until the "Key menu" menu item
appears on the display.
3. Press the Info button.
4. Remove the grey Intelligent Key and insert the yel-
low or white Intelligent Key to be personalized.
5. Select the menu item to be changed by turning the
info button.
6. Press the Info button.
7. Select the setting of the menu item by turning the in-
fo button.
8. Confirm the setting by pressing the menu item.
9. Select the next menu item to be changed by turning
the info button.
10. After all settings have been made, call up the
"Save?" menu by turning the info button.
11. Press the Info button.
The authorizations are saved.
The "Continue key menu" display appears.
● Yes: Program another Intelligent Key
● No: Exit the key menu
12. Press the Info button.
Choosing the brush shape
This function is required when changing the cleaning
head.
1. Turn the info button until the "Brush head" menu
item appears on the display.
2. Press the Info button.
3. Turn the info button until the desired brush shape is
highlighted.
4. Press the Info button.
5. To change the cleaning head, move the lifting drive
by turning the info button:
 "Up": Lifting
 "Down": Lowering
 "OFF": Stopping
6. Turn the info button until the "OFF" menu item is dis-
played.
7. Press the Info button.
The menu is exited.
The controller performs a restart.
After-running time
1. Turn the info button until the "After-running time"
menu item appears on the display.
2. Press the Info button.
3. Turn the info button until the desired function is high-
lighted.
4. Press the Info button.
5. Turn the info button until the desired after-running
time is displayed.
6. Press the Info button.
Standard setting
1. Turn the info button until the "Standard setting"
menu item appears on the display.
2. Press the Info button.
3. Turn the info button until the desired accessory is
highlighted.
4. Press the info button to confirm ON/OFF.
5. Press the info button to exit the menu.
6. Switch the device off and on again to adopt the set-
ting.
Setting the language
1. Turn the info button until the "Language" menu item
appears on the display.
2. Press the Info button.
3. Turn the info button until the desired language is
highlighted.
4. Press the Info button.
Switch menu
The following functions are switched on and off via the
"Switch menu":
● Detergent dosing*
● Flashing beacon/ spotlight*
● Side brush spray nozzles*
● Spray suction
● Work lights
● Tank rinsing
The "Switch menu" is available in all program switch po-
sitions, except "OFF".
1. Press the Info button.
The "Switch menu" is displayed.
2. Press the Info button.
The list of functions available in the device is dis-
played.
3. Turn the info button until the desired function is high-
lighted.
4. Press the info button to change the switch state.
5. Turn the Info button until "Exit menu?" is displayed.
6. Press the Info button.
* Optional
Set maximum travel speed
1. Turn the info button until the "Travel speed" menu
item appears on the display.
2. Press the Info button.
3. Turn the info button until the desired maximum
speed is highlighted.
4. Press the Info button.
Factory setting
The factory settings of all parameters are restored (ex-
cept transport travel speed).
1. Turn the info button until the "Factory setting" menu
item is displayed.
2. Press the Info button.
3. Turn the Info button until "Yes" is highlighted.
4. Press the Info button.
Adjusting parameters for cleaning programs
All cleaning program parameters are retained until an-
other setting is selected or the device is switched off.
1. Set the program switch to the desired cleaning pro-
gram.
2. Press the Info button.
The first adjustable parameter is displayed.
3. Press the Info button
The adjusted value flashes.
4. Set the desired value by turning the Info button.
5. Confirm the changed setting by pressing the Info
button or wait until the set value is automatically ac-
cepted after 10 seconds.
6. Select the next parameter by turning the Info button.
7. After changing all desired parameters, turn the Info
button until the "Exit menu?" menu item is dis-
played.
8. Press the Info button.
The menu is exited.
Standard setting
Parameter changes made in the individual cleaning pro-
grams during operation are reset to the standard setting
when the device is switched off.
1. Turn the info button until the "Standard setting"
menu item appears on the display.
2. Press the Info button.
3. Turn the info button until the desired cleaning pro-
gram is highlighted.
4. Press the Info button.
5. Turn the Info button until the desired parameter is
highlighted.
6. Press the Info button.
The adjusted value flashes.
7. Set the desired value by turning the Info button.
8. Press the Info button.
English
Yellow Intelligent Key
The yellow Intelligent Key authorizes functions that are
required for the cleaning task.
The parameters for the various cleaning programs are
preset in the device. Individual parameters can be
changed depending on the authorization of the yellow
Intelligent Key.
The display texts for parameter setting are largely self-
explanatory.
"FACT" parameters (only available with R cleaning
head):
● "Fine Clean": Low brush speed for removing grey
film from fine stone.
● "Whisper Clean": Medium brush speed for mainte-
nance cleaning with reduced noise level.
● "Power Clean": High brush speed for polishing,
crystallizing and sweeping.
Authorisation management
● General access with the Intelligent Key
● Working speed
● Brush speed
● Suction system
● Contact pressure
● Water quantity
● Detergent dosage
● RAB/Blue Spot
● Spray suction
● Tank rinsing
1. Select the "Key menu" with the info button.
2. Confirm "access" by pressing the info button.
3. Define the other accesses and activate and confirm
them with the info button.
4. Press "Save?" with the info button to confirm and
save the settings you have made.
White intelligent key
Inserting the white Intelligent Key unlocks the device
and enables it for the use with preset parameters.
White Intelligent Keys can be used so that an Intelligent
Key with adapted parameters can be created for each
cleaning task.
The operator cannot change the parameters and they
are independent of the selection of the cleaning pro-
gramme on the program selection switch (the functions
"0", transport, vacuuming remain unchanged).
The grey Intelligent Key can be used to set the following
parameters for the white Intelligent Key:
● Travel speed
● Working speed
● Brush speed (only with R cleaning head)
● Contact pressure
● Water quantity
● RM dosing
● Suction system
● Work light
● Flashing beacon
● Detergent dosing unit ON/OFF
● Pre-sweeping unit
● Suction bar water valve
● Language
Programming the white Intelligent Key
1. Insert the grey Intelligent Key.
2. Turn the info button until the "Key menu" menu item
appears on the display.
3. Press the Info button.
4. Remove the grey Intelligent Key and insert the white
Intelligent Key to be personalized.
5. Select the menu item to be changed by turning the
info button.
6. Press the Info button.
7. Select the setting of the menu item by turning the in-
fo button.
8. Confirm the setting by pressing the menu item.
9. Select the next menu item to be changed by turning
the info button.
10. Turn the info button until the "Save?" menu item is
displayed.
11. Press the Info button.
The settings are saved.
12. Turn the info button until the "Exit menu?" menu
item is displayed.
13. Press the Info button.
Operation with the white Intelligent Key
1. Insert the white Intelligent Key.
● The "OFF", travel and vacuum functions work as
usual.
● In all other positions of the program selection switch,
the parameters programmed on the white Intelligent
Key are active. Different cleaning programmes can
no longer be selected.
15