Operating Mode - Mark UNIVERSAL CONTROL DMX Manual De Uso

1.4 Interface
1. DMX 512 XLR 3-pin male and female connector form DMX IN /OUT
2. External power supply
3. Status LED indicator
4. Key switch
5. Antenna
2. Operating Guide

2.1 Operating mode

UNIVERSAL CONTROL DMX has two operating modes:
- Configuration mode and
- Run mode
Configuration mode: Press button before power up, when you see the white LED, then release the
button to enter configuration mode. In this mode you can select ther protocol. Each time you press
the button, you change the color according to in the table, chosing the protocol.
Note: The device will remember the current protocol and grouping, therefore, no need repeat the
configuration .
UIVERSAL CONTROL DMX
Color
Red
Green W-DMX Receive
Blue W-DMX G3 Transmit
Yellow
W-DMX G4 Transmit
- 2 -
Protocol
WIDMX
User Manual/Manual de uso
EN