Restore Factory Settings - Mark UNIVERSAL CONTROL DMX Manual De Uso

WIDMX mode supports 6 groups
(FHSS, 1100 hops / sec)
1: RED ---------------------------- Red
2: GREEN ------------------------ Green
3: BLUE --------------------------- Blue
4: RED + GREED --------------- Yellow
5: GREEN + BLUE --------------
6: RED + BLUE ------------------ Purple

2.4 Restore factory settings

Long press (> 1sec.) and release the button in WIDMX protocol operation mode, the system will restore
to factory settings and restart. The LEDs will change to RED - GREEN - BLUE and RED again,
indicating that the unit is restored. The default group will be RED colour.
2.5 Connection and delete connection
In W-DMX G3 or G4 modes, press button in order to connect all receivers. Long press (> 3 sec.) and
the LED will change to RED colour, then release. All receivers connected in the same range will be
deleted.
In the W-DMX receive mode, long press (> 3 sec) a nd the LED will change to WHITE colour, then release.
All receivers in the current connection will be removed.
NOTE: In order to connect with the new transmitter, you need delete the previous connection.
3. Applications
3.1 One transmitter - one receiver
DMX signal input in a wireless transmitter and the signal is sent to another receiver in the same
group.
UIVERSAL CONTROL DMX
GZ protocol supports 7 groups
(Frequency Agile)
1: RED ----------------------------- Red
2: GREEN ------------------------- Green
3: RED + GREED --------------- Yellow
4: BLUE ---------------------------- Blue
Cyan
5: RED + BLUE ------------------ Purple
6: GREEN + BLUE --------------
7: RED+GREED+BLUE ------- White
- 4 -
User Manual/Manual de uso
EN
Cyan