Publicidad
Idiomas disponibles
Idiomas disponibles
Attach the plate to the window:
(See picture 04(I) on page 6).
CASEMENT WINDOWS' KIT
If you have a casement window, please
note that the window kit included with
this appliance is not compatible.
In case of a casement window, we suggest
to purchase the corresponding kit (model
UACC4005-20) through our website www.
universalblue.es.
The exhaust pipe is designed especially for
this model. Do not replace or lengthen it,
otherwise a failure will occur. The exhaust
air duct can be stretched up to 1500 mm. To
avoid bending, stretch as short as possible.
CONTROL
PANEL
CONTROL: USE
CONTROL PANEL
(See picture 05 on page 7).
14.
Timer button press this button
when the device is stopped to set
when you want it to turn on. Press the
button again to set the off time.
15. Mode button: press this button to
select between the following modes,
a light will indicate which mode you
have selected:
• Cold mode
• Fan/wind mode
• Dehumidifier/dry mode
16. On/off button: to turn the device on or
off
17. Speed button: press this button to
select the air speed. A light will
indicate whether you have selected
high or low speed.
18. Down button: press this button in cool
mode to decrease the temperature;
press the button in timer mode to
decrease the time.
19. Up button: press this button in cool
mode to increase the temperature;
press the button in timer mode to
increase the time.
AND
REMOTE
• Display window: the display will show
the set temperature.
• Remote control window: this window
indicates
whether
receiving a signal from the remote
control.
Note:
press
the
simultaneously to change from degrees
fahrenheit to degrees celsius.
REMOTE CONTROL
(See picture 06 on page 7).
20.
On/off button: to turn the device
on or off.
21. Cold/drier/fan buttons: press these
buttons if you wish to select the cold,
dehumidifier or dry mode, or fan.
22.
Up/down buttons: press these
buttons in cool mode to raise or lower
the temperature; press the buttons
if you have selected the timer to
increase or decrease the time.
23.
High/low buttons: press these
buttons to select high speed or low
speed.
24.
C/ºf button: used to change from
degrees fahrenheit to degrees celsius.
25.
Night button: press to select sleep
mode when the device is running
cold.
26.
Timer button: press this button
when the device is stopped to set
when you want it to turn on. Press the
button again to set the off time.
COOLING MODE
• When the device is switched on, this
mode will automatically be selected,
but it can also be selected on the control
panel. The indicator light in this mode
will light up.
• In this case, the device will expel
cold air and will operate in the air
conditioning mode.
• Press the corresponding buttons to
increase/decrease
(from 16º to 30º).
EN
the
device
down/up
buttons
the
temperature
is
23
Publicidad
