N'oveen EB350 Instrucciones De Uso página 10

strangulation, tripping or treading if not correctly arranged. The user shall make sure
that excess ties and electric cords shall be arranged in a safe way.
DEVICE DESCRIPTION
The device should not be used on an adjustable bed.
Place the mat on a mattress with the power cord at the end of the pillow. Make sure the
controller is coming out of the top of the mat and the heating elements are not under the
pillow.
Fix the mat with the elastic bands at the corners of the bed so that it fits snugly against the
base of the mattress. The Electric Mat should be securely attached to the mattress, smooth
out any bends and then make the bed as usual.
OPERATING
HEATING SETTINGS
0 = disabled
1 = low heat, FOR CONTINUOUS USE
2 = medium heat level
3 = high heat level
EB350 80X150 WHITE -1X; EB 360 140 X 160 WHITE are used only with SS29 controller
The blanket takes about 15 minutes to reach the desired temperature. Remember that the
temperature that is warm in the palm of your hand can be very high in other parts of your
body.
When you heat the blanket for the first time, you may notice a slight odor. But be sure to
ventilate the room after heating the blanket for the first time.
CLEANING AND MAINTENANCE
 Before cleaning the blanket, unplug it from the mains outlet and let it cool down
completely or for at least ten minutes.
 The blanket is equipped with a detachable cable. Disconnect the plug and remove
10