INSTALLAZIONE - INSTALLATION - INSTALLATION - INSTALLATION - INSTALACIÓN
dimensioni in mm - measures in mm - dimensions en mm - Maß im mm - medidas en mm
usare canapa o teflon
use hemp or teflon
employer chanvre ou teflon
benutzen Sie Hanf oder Teflon
usar cáñamo o teflon
G 1/2"
INSTALLAZIONE
Avvitare l'eccentrico alla parete utilizzando canapa o teflon per garantire la tenuta sui filetti. Controllare
che tra il muro finito e l'estremità dell'eccentrico vi sia una distanza di circa 10-15 mm (l'interasse tra i due
eccentrici dovrà essere di circa 150 mm).
INSTALLATION
Screw the eccentric to the wall using hemp or Teflon to guarantee tightness on the threads. Check that
between the finished wall and the end of the eccentric there is a distance of around 10-15 mm (the center
distance between the two eccentrics should be around 150 mm).
INSTALLATION
On recommande ainsi d'installer des filtres également sur le système général. Visser l'excentrique au mur
utilisant du chanvre ou du téflon pour garantir l'étanchéité sur les filets. Contrôler qu'entre le mur fini et
l'extrémité de l'excentrique il y a une distance d'environ 10-15 mm (l'entraxe entre les deux excentriques
devra être d'environ 150 mm).
INSTALLATION
Die Exzenterscheibe an die Wand mit Hanf oder Teflon einschrauben, um die Dichtheit der Gewinden zu
gewährleisten. Sicherstellen, dass die fertige Wand 10-15 mm von dem Ende der Exzenterscheibe entfernt
ist (der Achsabstand zwischen den zwei Exzenterscheiben soll etwa 150 mm lang sein).
INSTALACIÓN
Atornillen el excéntrico a la pared utilizando cáñamo o teflón para asegurar la hermeticidad de las roscas.
Controlen que entre la pared acabada y la extremidad del excéntrico haya una distancia de 10-15 mm (la
distancia entre los ejes tendrá que ser aproximadamente de 150 mm).
G 1/2"
Ch. 24 mm
4
17 mm