Sime SimeConn Serie Manual página 55

ERROR CODES
When the device shows an error, this is the
symbol that is actually displayed. There are
seven likely causes that lead to the error
and sometimes, they may be displayed at
the same time.
The error is displayed by means of a code
format "ERR xx". Where "xx" is for the error
number and is showed in hesadecimal form.
Example: Err 08 --> Defective coil
Description of the error
Error Description
The flow temperature sensor is
Faulty Inp. Fl. Sensor
faulty
The flow return temperature sen-
Faulty Ret. Fl. Sensor
sor is faulty
Error during the measure of refe-
Faulty Ref. sensor
rence
Scanning is not functioning cor-
Faulty reel
rectly
The electronics of the calculating
Reset
device have been restored
Faulty E PROM No communication with E
2
The instrument configuration in
Sum error
the E 2 PROM is incorrect
When an error occurs, the instrument must be replaced and sent to the supplier for testing
Left digit
Effect
No calculation performed. The records for
flow and energy are not updated (no new
memorised data)
No calculation performed. The records for
flow and energy are not updated (no new
memorised data)
No calculation performed. The records for
flow and energy are not updated (no new
memorised data)
No calculation performed. The records for
flow and energy are not updated (no new
memorised data)
The measurements have been lost since the
last data collection in the E
most the measurements for 1 day)
After re-setting, the instrument is not functio-
PROM
2
ning
No calculation is carried out. The flow and
energy records are not updated
Error codes
Right digit
Possible cause
Cut sensor cable; removed sensor
cable
Cut sensor cable; removed sensor
cable
The main circuit of the electronic
unit is faulty
Removed reel; the connecting cable
between the calculating device seat
and the flow sensor is damaged
2 PROM, (at the EMC
Faulty components
Faulty component
IT
ES
UK
55