IDENTIFICATION – PRODUCT DEFINITION
A) The Honey Liquifier Cabinet (item no. 6705) comes equipped with two shelves to support up to 72 1 kg
honey jars or alternatively, two 25 kg cans.
B) The Drier Cabinet (item no. 8230) comes equipped with the above-mentioned 2 shelves and with 10
additional drawers for pollen containment.
RECOMMENDED CABINET USE
The Cabinets have been designed for honey containment and heating and for pollen drying.
Any other use should be considered an improper - and therefore dangerous - use.
The cabinet is factory-set not to exceed a temperature of approximately 45°C.
THE MAXIMUM TEMPERATURE WHICH CAN BE REACHED BY THE CABINET IS 70℃.
TECHNICAL DESCRIPTION
The LEGA Cabinets are made from steel; any other material used for equipment construction is guaranteed as
the intended use.
Operation
The inside of the cabinet is heated via a thermostat-equipped electric resistor, which can be adjusted by the
user from the outside, while a fan is used to circulate hot air inside the cabinet through specially designed
ducts to guarantee uniform temperature distribution in all the equipment areas.
PART IDENTIFICATION
(1)
LEGA
srl
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
(2)
(3)
Figure 2 - Honey Liquifier Cabinet
1 - Removable cover (if used in "drier" version)
2 - Control panel
3 - Heated interior
15 / 58