INVENTOR C2-10L Manual Del Propietário página 16

The unit makes a loud noise when operating
The air filter is clogged.
l
The device is tilted instead of being in an upright position.
l
The floor surface is not flat.
l
Frost build up on coils
This is normal. This unit is supplied with an Auto defrost feature.
l
Drain hose water leakage
Check the correct installation of the drain hose.
l
Check for any blockage or damage of the drain hose.
l
Understanding Error and Protection codes
Error Codes:
AS- Humidity module sensor error -- Power off unit and temporarily unplug allowing
device to reset. If error persists, call for service.
ES- Tube Temperature sensor error -- Power off unit and temporarily unplug allowing
device to reset. If error persists, call for service.
EC- Refrigerant leakage detection -- Unit auto detects refrigerant leakage, if this occurs
the EC code will appear. Power off unit and temporarily unplug allowing device to reset.
If error persists, call for service.
Protection Code:
P2- The water tank is full or not installed correctly. Empty the tank or install it properly.
All the pictures in the manual are for explanatory purposes only. The actual shape of the unit
you purchased may be slightly different, but the operations and functions are the same.
The company may not be held responsible for any misprinted information. The design and
the specifications of the product for reasons, such as product improvement, are subject to
change without any prior notice.
Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for
further details. Any future updates to the manual will be uploaded to the service website,
and it is advised to always check for the latest version.
Scan here to download the latest version of this manual.
16
www.inventorappliances.com/manuals
EN