Descargar Imprimir esta página

Lansinoh SMARTPUMP 3.0 Instrucciones De Uso página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

Step by Step Assembly
1
1. Connect the back cover to the breast ange body by pushing the hinges together
Place purple silicone diaphragm, the feet down,
on the top of flange body. Ensure diaphragm fits
securely between rims of breast flange body.
3
Firmly push ComfortFit® Flange into breast
flange body.
5
Screw the collection bottle onto the breast
flange body.
8. Attach the other end of the 300mm tubing to the Y connector
7
300mm
600mm
Attach the other end of the 300mm tubing to the
Y connector.
300mm
2
Place clear diaphragm cap over breast flange body
and twist to secure so that the tubing portal
is facing the back of the pump.
4
Holding the base of the white valve, gently secure
the valve into the bottom of the breast flange body.
7. Attach one end of the 300mm tubing to the attachment port located on the back of the breast ange body.
Ensure the tubing is pushed all the way over the port and completely covers it.
6
600mm
300mm
Attach end of 300mm tubing to back of diaphragm
cap. Ensure that tubing is pushed all the way to
the base of the attachment port and completely
covers it.
8
300mm
x1
For single pump setup: Secure plug into open outlet
of Y connector. For double pump setup: Repeat
steps 1-7.
300mm
300mm
300mm
x2
5

Publicidad

loading