Publicidad
Idiomas disponibles
Idiomas disponibles
Warning: do not wash this electric bike direct with spraying water espe-
cially pressure washers. Avoid water entering electric components as this
may result in damage of the electric components.
3.
Operation
Your new electric assistance bicycle is a revolutionary transport means, applying steel
frame, Li-ion battery, a super high efficiency electric hub motor and controller with elec-
tric pedal assistance system, to support normal pedaling. The above-mentioned equip-
ment will ensure safe riding with excellent function and performance. It is important for
you to note the following guidelines to ensure getting the best possible experience from
your electric bicycle.
Checklist before riding
3.1.1 Please ensure tires are fully inflated as indicated on the tire wall, before riding. Re-
member, performance of the bike is directly related to the weight of the rider and
baggage/load, together with the stored energy in the battery;
3.1.2 Charge overnight, prior to riding the next day;
3.1.3 Apply chain oil periodically and clean if dirty or gummed up, using a degreaser, then
wipe clean and oil bicycle chain again.
4.
Battery installation & usage
The electric bikes have the battery positioned within the rear carrier (the battery pack is
directly connected to the controller box in the front. (Fig. 2)
The slider of battery is fixed on carrier by bottom screws (Fig. 2.1).
Then the battery case is locked by the key (Fig. 3 & 4) see the operation details below.
(Fig. 2)
37/76
Publicidad
