Polaris Spabot ES37 Serie Manual Del Propietário página 8

2
Cleaning
cleaner is submerged or operating. Turn off spa pump and jets while using cleaner.
Not intended for use in swimming pools.
Cleaning Pattern
60 min
4h
Spabot autonomously navigates
around the floor, seats, and walls of
your spa to clean in only 60 minutes.
Start Cleaning
1. Slide down and release the
On/Off power switch. Wheels and
brushes quickly move forward and
back one time to confirm power is on.
2. Submerge the cleaner in the spa.
(The cleaner will not begin until it
senses water.)
8
To avoid risk of potentially serious injury, do not use the spa when the
3. Hold under water until the bubbles
are gone.
4. When the bubbles stop, release the
cleaner. The cleaner will sense it is
in water and begin to move.
Remove from Spa
1. When the cleaning cycle ends, the
cleaner will float at the surface and
the LEDs will be OFF.
2. When in reach, grab the cleaner
and remove from the spa.
Spabot Cordless, Battery-Powered Spa Cleaner
™