Torro FORD GPA Manual De Instrucciones página 22

REMOTE CONTROL BINDING
The code-binding was already done ex works, so that the remote control and the receiver are
directly connected to each other.
If the remote control and receiver were purchased separately, or the remote control was used
for a different model, the binding must be performed again.
1. To open the engine compartment, remove engine compartment cover by turning the lock.
2. Switch on the model.
3. Press and hold the binding button with a suitable object (e.g. pen or another non-
conductive objetct!) until the blue LED of PCB receiver board flashes.
Then let off the binding button.
4. Switch on the transmitter.
As soon as the LED light will be solid the binding is completed.
Power switch
Binding button
-8-
FORD GPA
Lock
Power switch
(located in the front passenger
footwell)