Torro FORD GPA Manual De Instrucciones página 23

DECAL APPLICATION
1. The surface on which the decal will be applied should be as free of grease and dirt as possible.
2. Cut decals from sheet as needed.
3. Briefly dip the decal in warm water.
4. The decal should be able to move on the transfer paper with a minimal pressure from your fingers.
5. Hold the edge of the decal sheet and gently slide the decal onto the model in its proper position.
6. Tip: the decal should still be very wet when you apply it - do not dry it before.
7. When placed in the proper position, gently press decal down with a soft cloth until excess
water and air bubbles are removed.
8. Application of suitable decal-fix is recommended.
(Attention: follow the application instuctions of the respective manufacturer)
Ford Motor Company
Type Ford GPA
Vehicle No: 385215
Motor Type : RWD /4x4
Weight : 1110 kg
Maximum load : 1610 kg
Length: 182 inch Width: 64 inch
Height: 69 inch
Caution
only switch to waterdrive
when the vehice is in the water
-9-
FORD GPA
12
9 3
6