Publicidad
Idiomas disponibles
Idiomas disponibles
How to adjust a single cam
Make sure that cams get to the switch lever according to its inclination
direction, otherwise you could damage the switch.
At the desired position of the actuator output:
CW replaces clockwise
CCW replaces counterclockwise
Left side
See TPF_0016 for more details on cams setting.
1. Turn the setting screw of
the
corresponding
with a flat blade or a
Philips screwdriver.
7.
The cam disk is then
turning.
2. Set the cam disk until you
hear a click from the
switch. It indicates the
trigger of the switch.
Always set a cam from the
same side according to the
accessible screw side.
8.
17
cam
Right side
Publicidad
