Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Instructions
Before using this product, please read thoroughly and comply with the
Safety Instructions. Failure to read and follow may void the warranty.
This document must be kept in a safe place and if the laser device is
passed on, this document must be passed on with it.
WARNING!
Class 2 Laser Product
Max. Power Output: <1mW
Wavelength: 505nm-660nm
LASER RADIATION:
DO NOT STARE INTO BEAM.
DO NOT DIRECT EYE EXPOSURE.
AVOID VIEW WITH OPTICAL INSTRUMENTS.
ATTENTION:
Read all instructions prior to operating this laser tool. Do not remove any
labels from tool.
• While the product is in operation, be careful not to expose your eyes to
the emitting laser beam (Green/Red light source). Exposure to a laser
beam for an extended time may be hazardous to your eyes.
• Do not attempt to view the laser beam through optical tools such as
telescopes as serious eye injury may result.
• Do not disassemble or modify the laser in any way. Modifying the tool
may result in hazardous Laser Radiation Exposure.
• An exposure to the beam of a Class 2 laser is considered safe for a
maximum of 2 seconds. Eyelid reflexes will normally provide adequate
protection.
• Reflective, specular or shiny surfaces must be covered whilst laser
devices are in operation.
• In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
-3-
IEC/EN60825-1: 2014
Publicidad
