Huepar 6141G Manual De Instrucciones página 8

• When all the indicators are off, the device is turned off (may due to low
battery)
Self-leveling & Manual Mode
Self-leveling Mode:
• is enabled when the pendulum is switched to the ON Position.
• When the device is out of self-leveling range (±3°), the laser beam(s)
blink fast.
※Note: When working under self-leveling mode, please place this laser
tool on a level surface.
Manual / Tilt Mode:
• When the pendulum in OFF Position, Short press
turn ON the manual mode.
• The laser beam(s) will blink about every 3-5 seconds to notify the user
it is not self-leveling now.
• Position the device at various angles.
Pulse Mode
• The full-time pulse mode is enabled when the device is turned on.
• The device can work with a laser detector for working in a brighter
environment or a larger working distance.
• Only compatible with Huepar dedicated laser receiver. The laser
pulses may not be detected if use the receiver from other
manufacturers. Please follow the instructions that came with the
receiver and use it properly.
-6-
or to