ASSEMBLING/USING
Safety belt (fig. 1)
1
Pass the safety belt through the crotch strap and
fit the buckle in place until you hear "click" making
sure that it is correctly anchored. Adjust belt in
right length to fit your child.
To open the buckle, press on the two hooks that
overhang at the same time and pull on them.
WARNING: Always use the crotch strap along with the safety belt.
EN
Assembling the toy bar (fig. 2)
2
Assemble toy bar as shown on the picture.
Adjusting the backrest (fig. 3)
3
The different positions allow the baby to be placed
in an adequate position at all times, ranging from
a sitting position to a laying down position.
To regulate the backrest, lift the adjustment
button (B) on each side and move the backrest to
the desired position, then lower the adjustment
button again to fix it.
10