Vibration; Maintenance; Protecting The Environment - SKF TLGB 20 Instrucciones De Uso

Vibration

The declared vibration emission values
stated in the technical data and the declara-
tion of conformity have been measured in
accordance with a standard test method
provided by EN 60745 and may be used for
comparing one tool with another
The declared vibration emission value may
also be used in a preliminary assessment of
exposure
NOTE
Vibration emission value during actual use of
power tool can differ from declared value
depending on ways tool is used Vibration
level may increase above level stated
When assessing vibration exposure to deter-
mine safety measures required by 2002/44/
EC to protect persons regularly using power
tools in employment, an estimation of vibra-
tion exposure should consider, the actual
conditions of use and the way the tool is
used, including taking account of all parts of
the operating cycle such as the times when
the tool is switched off and when it is running
idle in addition to the trigger time
WARNING

Do not operate this grease gun
without reading instruction
manual
Failure to comply may result in
serious injury and/or death

Maintenance

Designed to operate over a long period of
time, with a minimum of maintenance
Continuous satisfactory operation depends
upon proper tool care and regular
cleaning
Your charger does not require any
maintenance other than regular cleaning
WARNING

Do not perform maintenance on this grease
gun with the battery installed
• Do not clean the charger while plugged
into an electrical outlet
• Failure to comply may result in serious
injury and/or death
NOTE
Regularly clean ventilation slots in tool and
charger using a soft brush or dry cloth
Regularly clean motor housing using a
damp cloth Do not use any abrasive or
solvent-based cleaner
5
Protecting the
environment
Should you ind one day that your SKF
product needs replacement, or if it is of no
further use to you, do not dispose of it with
household waste Make this product availa-
ble for separate collection
Separate collection Product
must not be disposed of with
normal household waste
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by
the retailer when you purchase a new
product
Separate collection of used
products and packaging allows
materials to be recycled and used
again
Re-use of recycled materials
helps prevent environmental
pollution and reduces the demand
for raw materials
Run the battery down completely,
then remove it from the tool
NiCd, NiMH and Li-Ion bat-teries
are recyclable Take them to any
authorized repair agent or local
recycling