Publicidad
Idiomas disponibles
Idiomas disponibles
A Global Leader in Hig h - Tech Banking E
Innovation
3.5 Magnetic Detection Function
By default, the MG function is automatically turned on when the unit is powered up. The counting
operation proceeds as normal. If the machine detects a counterfeit bill, it will stop counting. The unit will
emit triple beeping sound. Moreover, the display will show the signal "B" and the MG indicator will blink,
alerting the user of the presence of a dubious bill. The problematic bill will be the last one on the stacker.
If the bills placed in the stacker including the dubious one are not removed from the unit, the MG indicator
and the message "B" will keep blinking.
To adjust the sensitivity of the MG function, press the MG button for 3 seconds. The batch number
display will show the current sensitivity level (increasing sensitivity from 0 to 10). Using the "+" or "-"
buttons to set the desired sensitivity level, press RESTART.
3.6 "ADD" Function
Addition can be performed by pressing the "ADD" button (ADD must show on the display). In this case,
removing the counted bills from the stacker will not clear the quantity counted and shown on the screen.
The next bills placed in the hopper will be counted and added to the preceding quantity. The total amount
of added bills will be shown on the counter display. To clear the count, press the "RESTART" button.
If the machine stops during the addition operation due to an error message, remove the cause of the
error. Remove the bills from the stacker and from the feeding rolls, if any. The unit will resume counting
after the problem has been solved.
11
QUI
can
on
YOU
COUNT
pment
Publicidad
