MB-5413700-Bedien-1007
ATTENTION! An advance too
strong for a tip width that is too
small may cause the product to come
out at the rear end of the cartridge
and may lead to the contamination of
piston and push rod.
10 – Maintenance and
environmental
protection
Only use a damp cloth to clean the
housing – do not use any solvents!
Finally, wipe it off well. In order to
maintain the capacity, we recommend to
completely discharge and recharge the
battery every two months. Store only fully
charged batteries; thus recharge them
from time to time. The storage location
must be dry and frost-proof, the ambient
temperature may not exceed 40 °C.
Remove any contamination in the cartridge
case, on the push rod and piston using
toilet paper or a cleaning rag.
ATTENTION! Do not have silicone
filler come into contact with the
powered parts. Risk of malfunction.
Contamination caused by silicone filler
can be removed after the material has
completely hardened.
ATTENTION! Never pull the push
rod completely out of the device.
Risk of damage to the drive mechanism.
CAUTION! Unusable
power tools do not
belong with domestic
waste! They must be
taken to a communal
collecting point for
environmentally friendly
disposal in accordance
with local regulations.
16.10.2007 8:55 Uhr
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
batteries into fire or water, as they
may explode!
11 – Service instructions
• Store the machine, operating
• Meisterbasic devices are to a large
• Meisterbasic devices are subject to
• A brief description of the defect speeds
• In so far as a repair under guarantee
Seite 53
ATTENTION! Take care of the
environment! Do not throw used
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all
the information and parts ready to
hand.
extent maintenancefree, a damp cloth
being sufficient to clean the casing.
Do not drop electrical machines in
water. Please note additional hints
given in the operating instructions.
stringent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short
time.
up the faulttracing and repair time. If
within the guarantee period, please
enclose the guarantee document and
the proof of purchase.
is not concerned, we will charge the
repair costs to your account.
53