Publicidad
Requirements
• A flat-panel TV that is compatible with a VESA mount
• A Phillips screwdriver
Requirements are subject to change. For the latest requirements, please visit
www.StarTech.com/FLATPNLWALL.
Installation
Warning! Make sure that the weight of the TV doesn't exceed the weight
capacity of this product. If you exceed the weight capacity, you might experience
personal injury or damage to the product. This product can support the
following weight: Up to 75 kg (165 lb.).
Attach the wall plate to the wall
Warning! The wall mount is designed to be installed on a wood stud, solid
concrete, or cinder block wall. The wall structure should be capable of supporting
at least four times the weight of the mounted equipment. The mounting hardware
included with this product may not be adequate for installation on certain wall
structures. If you lack the necessary expertise to attach this product, contact a
construction professional to install the wall mount or to provide specific mounting
instructions for your wall structure. Failure to do so may result in personal injury and/or
equipment damage.
1. Use a pencil to mark the location on the wall where you want to attach the wall
mount.
Note: You can use the holes or slots on the wall mount to attach it to the wall.
2. Follow the appropriate steps for the type of wall that you're attaching the mount to
and attach the wall plate (1) to the wall.
Instruction manual
Mounting holes and slots
Mounting holes and slots
6
Publicidad
