Ardea MOBILITY 210 Manual De Instrucciones página 48

14
11.3 Armrest adjustment
ADJUSTING THE SIZE OF THE ARMRESTS
(Fig. 1) (illustrative image)
1. Loosen the adjustment knob on the back of the seat
2. Slide the armrest in or out to obtain the desired width;
3. Tighten the adjustment knob again.
WARNING!
Ensure that the adjustment knobs are firmly screwed onto the tube inserted in the
armrest. Do not extract the armrest too far.
2
(Fig. 2) (illustrative image)
11.4 Seat adjustment
SEAT ROTATION LEVER
(Fig. 3) (illustrative image)
1
TIPPING THE ARMRESTS
Raise the armrests to assist getting on and/or off the
scooter
SLOPING THE ARMREST
Turn the adjustment knob in an anti-clockwise
direction to increase the slope of the armrest.
Turn the adjustment knob in a clockwise direction to
reduce the slope of the armrest
The seat can be rotated through 360 ° and locked at
every 45 °:
1. Press the lever down and rotate the seat to the
desired position
2. Release the lever to lock the seat in position at
every 45°.
(Fig. 1);
(Fig. 2 - point 1).
(Fig. 3).
(Fig. 2 - point 2).