DAY Useful Everyday 73620 Manual De Instrucciones página 28

DISPLAY
bm
bn
9
5
4
2
1) on/off
2) Temp
3) Heat
4) Timer
5) Swing
6) +/-
7) indication low heatin
8) indication high heating
9) indicator timer
10) indicator fan
11) indicator temp
12) indicator swing
BEFORE USE
Assemble the socket by sliding the 2
halves together and fasten it to the
heater with screws.
7
bl
8
1
3
6
28
USE
Plug in the power and turn on the
power switch. The display screen will
show the ambient temperature with the
product in standby mode.
ON/OFF BUTTON: press "
product will be powered on and the fan
indicator will light up. Press "
in the unheated state to turn off. In the
heated state, press "
will continue to blow air for 30 seconds
after shutdown.
HEATING: After pressing the "ON/OFF",
press the " " , and the indicator light
will show " ". It is now in low heating
mode. Press " " twice and the indica-
tor light show " ". It is now in high
heating mode. Press "
and the heating will turn off.
TEMP: Press " ". By default, the first
time you press the thermostat button,
it will show 25 degrees. The lowest tem-
perature setting is 15 degrees and the
maximum is 40 degrees.
Raising the temperature above 40 de-
grees will cycle the temperature setting
back to 15 degrees.
You can always press the thermostat
button " " to reset the temperature.
When setting the temperature, press
" " to cancel and stop heating. The fan
will still blow air. If the set temperature
" and the
" again
" and the product
" a third time