Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLING LOGS
VL-W18DL, VL-W24DL
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this log set may result in property damage or personal injury.
CAUTION: After installation and periodically thereafter, check to ensure that no yellow flame comes in
contact with any log. With the log set set to High, check to see if yellow flames contact any log. If so,
reposition logs according to the log installation instructions in this manual. Yellow flames contacting
logs will create soot.
It is very important to install the logs exactly
as instructed. Do not modify logs; use only logs
supplied with log set. Each log is marked with a
number, and this number will help you identify
each log during installation.
NOTE: These log installation instructions are recom-
mended to decrease the amount of sooting the most.
1. After optional accessories are installed (see
previous page), slide both risers onto the back
of the grate. Make sure the back of the grate is
flush with the back of the riser.
2. Place log #1 on the top of the front grate and
make sure the log is centered in the grate.
1
1.
Back of grate
2.
13
Provided Logs: 6
2
3
4
5
6
1
Publicidad
