Manta MDL007 Manual De Usuario página 4

Please read the operating instructions carefully before using the
unit!
LOCATION:
Place the unit on a flat and level surface. Assure the stability of the
ball.
WARNING:
Depending on the nature of the surface on which the unit is placed,
the normal heating of the unit may cause surface to fade.
ADEQUATE VENTILATION:
The ventilation slots of the unit must never be covered. Make sure
that there is a free space of at least 10cm to the side of and above
the unit and that heat can be dissipated without obstruction.
INSTALLATION:
5. Make sure that the mains switch on the device is switched off
(Position "o")
6. Plug the adapter into adapter socket located under the base of
the unit.
7. Plug adapter into wall outlet.
8. Turn the power switch to the on position.
CLEANING:
Remove the plug-in power supply from the socket before cleaning
the device. Clean the device with a soft and dry cloth. Never use
chemicals or harsh abrasives.
SAFETY INSTRUCTIONS:
User's Manual
4
E N