Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Cleaning scheduling:
-
To make cleaning easier, the robot has a function that allows it to be programmed daily
from the app. According to the setting, the robot will automatically start cleaning in the
selected days at the desired time.
-
Before adjusting the robot's time and settings, make sure the robot vacuum cleaner is
switched on.
Other Functions;
Night Function:
The robot vacuum cleaner can be assigned a do-not-disturb time slot, which can be modified
or cancelled from the mobile APP. During the set time, the robot vacuum cleaner will disable
the automatic, continuous cleaning and timer functions.
Map Editing function:
This function allows you to edit generated maps: rename cleaning areas, split or combine
areas, and edit cleaning mode, suction power, and scrubbing level in each selected area.
Robot Location function:
Allows to locate the robot vacuum cleaner on the map.
4. CLEANING AND MAINTENANCE
Main brush cleaning
-
The main brush rotates at high speed and helps pulling the dirt into the suction nozzle.
This brush is in contact with the floor, and therefore with dirt, so it can be worn out over
time, negatively affecting cleaning efficiency. For this reason, it is suggested to replace the
main brush after a maximum of 320 hours or less.
-
Slightly press the main brush frame tabs to open the main brush slot and remove it. Fig. 9
-
Remove hair, lint, and other dirt trapped in the brush and around the shafts with the help
of the self-cleaning brush. Fig. 10
-
Clear and clean the robot suction channel.
-
Reinstall the main brush and its frame.
Recommendation
It is recommended to clean the main brush once a week with the help of the cleaning brush.
Side brushes. Fig. 11
Side brushes are designed with multiple bristles and are used to push dirt towards the suction
nozzle and to thoroughly clean edges and corners. These brushes can wear out over time,
negatively affecting cleaning efficiency.
58
Publicidad
