Publicidad
Idiomas disponibles
Idiomas disponibles
3. OPERATION
Robot buttons
Auto mode:
-
Press the Start/Pause button on the robot vacuum cleaner or select it in the app to make it
start cleaning automatically in Edge mode and then perform a cleaning cycle in an orderly
zigzag pattern while it also recognises which areas have been cleaned and which have not.
The robot will automatically plan the cleaning route as it is cleaning.
-
If during this mode the robot is controlled manually, it will calculate the route again and
could go through previously cleaned areas. To ensure efficient cleaning, do not operate the
robot vacuum cleaner manually during automatic cleaning.
-
Thanks to its Total Surface 2.0 technology, if the battery is low during the cleaning cycle,
the robot vacuum cleaner will smartly return to the charging base automatically and once
fully charged, it will resume the cleaning process from the same point.
-
During cleaning, the robot vacuum cleaner will stop briefly to evaluate the area and
calculate the cleaning route (this stop will vary depending on the house conditions).
Back Home mode:
-
Press the Back Home button on the robot vacuum cleaner or select it in the app to send
the robot vacuum cleaner to the charging base. The robot vacuum cleaner will continue
vacuuming until it reaches the charging base.
-
This mode can be activated during any cleaning cycle.
-
The robot vacuum cleaner will take the shortest route back to the charging base thanks to
its map memorizing and the smart back home function.
-
Upon completing a cleaning cycle or when the battery is low, thanks to its TotalSurface
2.0 technology, the robot vacuum cleaner will automatically return to the charging base to
avoid running out of battery. Once the robot has recharged, it will resume cleaning from
the point it has stopped.
Warning
If there is no good access to the charging base, the robot will not be able to return to it. If this
happens, place it manually on the charging base.
Functions
Pause:
While the robot vacuum cleaner is running, press the Start/Pause button on the robot vacuum
cleaner or select it in the app to pause the cleaning process. Press the Start/Pause button on
the robot vacuum cleaner or on the app to resume the cleaning process.
ENGLISH
ETERNAL MAX X-TREME
55
Publicidad
