Publicidad
Idiomas disponibles
Idiomas disponibles
Choose
1.
If the rated power of the provided equipment is unknown, it can
be gotten by the rated current of the provided equipment times
the voltage of the provided equipment (current * voltage =
power). Users should choose the Power Supply with the rated
power 20%-30% higher than real service power and peak power.
2.
If running 24*7 hours, the load does not exceed 40%.
3.
For device, SMPS power ≥ device power × 1.25 times. For Motor
device, the peak power of the SMPS needs to be more than 2
times the power of the Motor.
4.
For stepping motor and brushless motor: the maximum service
power/current should not be 50% higher than the rated power or
current of Power Supply.
NOTES
1.
The Indoor Power Supply should be kept away from fog! Avoid
damage to the Power Supply due to moisture.
2.
Avoid electromagnetic interference and be 3m/10ft away from
power amplifier.
3.
Maintenance service: The use in the environment not in the
specified scope or artificial damages will make you loose free
maintenance service.
4.
Strong recommended to install by a licensed electrician!
5.
If the power grid is in a bad environment, please take steps to
improve the stability and reliability of power supply in use.
6.
If the voltage of power grid fluctuates greatly or undervoltage or
overvoltage emerges frequently, please consider installing a
stabilizer with enough power or input overvoltage/undervoltage
protector before turning on Power Supply.
7.
If there is any large powered device on power grid, please
consider installing a supporting AC filter before turning on Power
Supply.
8.
When ambient humidity and temperature exceed the upper limit,
reduce output power according to power output curve. Otherwise,
®
MEISHILE
6
Publicidad
