Controller Spacing; Din Rail Mounting - Allen-Bradley MicroLogix 1100 Instrucciones De Instalación

Controller Spacing

The controller mounts horizontally, with the expansion I/O extending to the right
of the controller. Allow 50 mm (2 in.) of space on all but the right side for adequate
ventilation, as shown below.

DIN Rail Mounting

The maximum extension of the latch is 14 mm (0.55 in.) in the open position. A
flat-blade screwdriver is required for removal of the controller. The controller can
be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. DIN rail mounting
dimensions are shown below.
Dimension
A
B
C
MicroLogix™ 1100 Programmable Controllers
Side
ESC ESC
Height
90 mm (3.5 in.)
27.5 mm (1.08 in.)
27.5 mm (1.08 in.)
Top
OK OK
Bottom
Publication 1763-IN001A-MU-P - May 2005
11
B
A
C