Publicidad
Idiomas disponibles
Idiomas disponibles
2 Safety
2.4 Basic safety instructions
The product has been developed and manufactured in accordance with the latest technology and
recognized safety standards and directives. Due to the product design, unavoidable technical residual risks
exist to the user, third parties, devices, and other material property. The manufacturer will accept no liability
for damage caused by non-observance of the documentation.
► Please read the documentation carefully before using the product for the first time and comply with the
instructions contained.
► Only operate the product in technically perfect condition and ensure compliance with all
documentation.
► Read the documentation carefully before carrying out specific work, for example, commissioning,
operation, transport, and maintenance.
► Use suitable means to protect yourself and bystanders from the hazards listed in the documentation.
► Store the documentation within easy reach of the device for reference and enclose all documents when
passing on the product.
► Consult the documentation on additional welding components.
► Information about how to handle gas cylinders can be found in the instructions provided by the gas
manufacturer and the relevant local regulations, e.g., compressed gas regulations.
► Observe the local accident prevention regulations.
► Only trained specialists should commission, operate, and service the device. Qualified personnel are
persons who, based on their special training, knowledge, experience and due to their knowledge
of the relevant standards, are able to assess the tasks assigned to them and identify possible dangers.
► Ensure the work area is well lit and keep it neat and tidy.
► Switch off the power, gas, and compressed air supplies and unplug the mains plug for the entire
duration of servicing, maintenance, and repair work.
► For disposal, observe the local regulations, laws, provisions, standards, and directives.
Safety instructions for electrical components
► Check electric tools for damage and ensure that they function properly and in accordance with their
designated use.
► Do not expose electric tools to rain and avoid a moist or wet environment.
► Protect yourself from electric shock by using insulating mats and wearing dry clothing.
► Do not use the electric tools in areas subject to fire or explosion hazards.
Safety instructions for welding
► Arc welding may cause damage to the eyes, skin and hearing. Please note that other hazards may arise
when the device is used with other welding components. The personal protective clothing prescribed by
local regulations must therefore always be worn.
► All metal vapors, especially from lead, cadmium, copper, and beryllium, are harmful. Ensure sufficient
ventilation or extraction. Do not exceed the current occupational exposure limits (OEL).
► To prevent the formation of phosgene gas, rinse workpieces that have been degreased with chlorinated
solvents using clean water. Do not place degreasing baths containing chlorine in the vicinity of
the welding area.
► Adhere to the general fire protection regulations and remove flammable materials from the vicinity of
the welding work area prior to starting work. Provide appropriate fire extinguishing equipment in
the workplace.
Safety instructions for personal protective clothing
► Do not wear loose fitting clothing or jewelry.
► Use a hair net for long hair.
► Wear safety goggles, protective gloves, and a respiratory mask, if necessary.
EN - 8
ABICAR ADVANCED 42V
Publicidad
