Elma 28.00.2 Manual Del Usuario página 7

03. ASSEMBLY AND USE
3.2. ASSEMBLY AND USE
• Assemble bracket A (3) to the grill (2) using
one M6x18 screw and one M6 nut.
• Assemble bracket B (4) to the grill (2) using
two M6x18 screws and two M6 nuts.
• Attach the burner (1) to the grill (2) of the stove
using 1 screw M6x18 on Support A (3); and
another 2 screws M6x18 on support B (4).
• Assemble one leg (5) on each corner of the
stove grill, using one screw M6x18 and one
washer M6 for each leg.
• Install the gas valve (6) on the burner. Turn the
valve gently and do not overtighten, to avoid
damaging the burner thread.
• Connect the gas bottle to the gas valve by
means of a butane pipe.
• Open the gas valve to supply the burner.
Warning! Extremely flammable gas will
now come out the burner, light the flame
immediately.
04. DECLARATION OF CONFORMITY
UDOM S.L. declares that the product with
reference number 28.00.2 and description
"Cast iron gas stove" complies with the following
CE marking requirements:
EN 30-1-1:2008+A1:2010
• Light the gas store by carefully putting a flame
near the burner. We recommend you use a
lighter or matchstick to do this.
Warning! Do so with extreme caution so as
not to suffer burns.
• Adjust the intensity of the flame by sliding the
gas air mix regulator (7).
• Place the cooking utensil you wish to use on
top of the grill.
The gas stoves are protected with an
anti-corrosion treatment.
first use, it is recommended to let it
operate for a few minutes to prevent the
appearance of soot on the bases of pots
and pans. This treatment will disappear
with use, and it is therefore likely that
rust will appear over time on cast iron
components.
Before the
7