Publicidad
Idiomas disponibles
Idiomas disponibles
Before disassembling the shipping bolt, the rat resistance panel should be installed.
Please follow the steps below to install the panel.
1.
Incline the machine to a suitable angel for installation. Packaging pad can be
used under the machine. When inclining the machine, make sure no damage to it.
2.
Remove the tapes pasted on four sides of panel.
3.
Adjust the panel as per marked direction to the correct position, make sure the
mark "F" leads to the front of the machine.
4.
Stick the panel to the machine.
After all the steps above finished, please upright the machine to the correct position.
First step
FRONT
Publicidad
