SOLAC PC1503 Instrucciones De Uso página 8

position.
The indicator will flash until the desired
temperature is reached and will remain it.
Push on time the Steam button to start
working.
NOTE: It is not necessary to keep the button
pressed to have steam, with one time is
enough, once you no longer want steam press
the button again to end the operation.
Orient the appliance to direct the steam flow in
the desired direction
NOTE: If you do not change the mode every 25
seconds the product will steam
STEAM GARMENT:
The steam garment is easy to use and is
perfect for removing wrinkles/creases from
garments and curtains as well as refreshing
furnishings fabrics.
It can be used on most fabric as long as the
fabric is hanging or where the garment steamer
can be easily used in an upright position
moving over the fabric in an up and down
motion.
NOTE: the garment steamer is designed to
be used in an upright position on hanging
garments, refrain from using the steamer in or
on garments in a horizontal position.
Hang the garment from a hanger and stretch
the fabric slightly with one hand.
Check that there is ventilation behind the
fabric.
Check garment pockets are empty.
NOTE: we recommend you do not steam over
metal accessories, use caution and steam
around the metal accessories.
To steam curtains
1.wash and dry curtains as directed, according
to the fabric type.
2.hang the curtains and steam when they are
hanging in place.
3.lightly stretch the curtain with one hand while
steaming to help remove creases more easily.
To steam upholstery
1.the garment steamer can be used to help
freshen up upholstery, slip covers on furniture
and cushions from the furniture and in the
room. before steaming, always test on a small
area of the fabric that is not visible.
2.keeping the garment steamer in an upright
position and using and up and down motion.
lightly steam over the fabric of your furniture.
LIBRO MANUAL PC1503.indb 8 LIBRO MANUAL PC1503.indb 8
cushions should be removed and held upright
for steaming. allow cushions to dry thoroughly
before replacing on furniture.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Press the steam selection button for a while,
you will see that the light will be switched off.
Unplug the appliance from the mains.
Remove the water from the water tank.
Let the product cool down.
Clean the appliance.
ASSEMBLE THE ACCESSORIES
Attention. Always let the steamer cool
down before assembling or removing the
attachments.
Assembly of accessories.
1 Align the bottom protruding part of the
accesory into the bottom groove of the steam
head.
2 Push the head of the accessory until the top
protruding part also clicks in the top groove of
the steam head.
SAFETY THERMAL PROTECTOR:
The appliance has a safety device, which
protects the appliance from overheating.
If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
AUTO OFF
When the product is not used for 20 minutess,
the AUTO- OFF light comes on and then the
product will switch off automatically.
DECALCIFICATION
If the appliance begins to begins to produce
steam more slowly than, or stops producing
steam and then starts again, you may need to
decalcify your steamer. Decalcification refers to
removing the calcium deposits that form over
time on the metal parts of the steamer. For
best performance from the Garment Steamer,
please decalcify the unit from time to time. The
frequency depends upon the hardness of the
water being used and how often you use the
steamer.
9/2/22 18:22 9/2/22 18:22