SOLAC PC1503 Instrucciones De Uso página 9

Method.
1.To decalcify, use a solution of 1/3 white
vinegar 2/3 water in the water tank.
2.Plug the unit into electrical outlet. Wait
until the red light goes off . Press the mode
selection button until the MAX mode is set,
wait until the product has reached the proper
temperature then push the steam button,
Release the steam button, unplug from
electrical outlet, and allow to cool for 30
minutes.
Repeat the above procedure as many times as
necessary until a normal steam rate returns,
usually 2 to 3 times. With each repeated cycle,
use a fresh solution of vinegar and water.
Run one cycle of distilled water through the
unit at the completion of decalcification before
using the product again.
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO
NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
LIBRO MANUAL PC1503.indb 9 LIBRO MANUAL PC1503.indb 9 9/2/22 18:22 9/2/22 18:22