Installing the Power Strip
Install the power strip with 4 screws and nuts.
Position 1: Most recommended for wall or desk installations:
Power strip is positioned on the inside of the unit with outlets
facing in through the opening in the back.
Position 2: Alternative position for desktop or stacked usage:
Power strip is positioned on the outside of the unit with outlets
facing in through the opening in the back.
Position 3: Alternative position for wall-mount usage: Power strip
Installing Charging Cables and Adapters
is mounted to bottom side of chassis with outlets facing upward.
Step 1: Place a security screw in the side of the chassis
hold the tray open during the wiring process.
1
Installing AC Adapters
Step 1: Place a security screw in the side of the chassis (A) to
hold the tray open during the wiring process.
Step 3: Determine the best method of arranging the cables that come with your device (figures
AC ADAPTERS FRONT TO BACK
Best for some wider adapters.
Step 3: Determine the best method of arranging the cables that come with your device (figures C, D, E below).
AC ADAPTERS FRONT TO BACK
Best for some wider adapters.
3.
For Additional Support Call: 866.393.4202 or Email: Support@JAR-Systems.com
Position #1
(A)
to
2
(AC Version Only)
A
AC ADAPTERS LEFT TO RIGHT
A
Best for some narrower adapters.
AC ADAPTERS LEFT TO RIGHT
Best for some narrower adapters.
C
(AC Version Only)
Reversible Power Strip
The power strip can be mounted on either the front or the back
side by reversing the mounting brackets. Loosen the screws on
each side, rotate the bracket, and re-fasten the screws.
Position #1
Step 2: Determine the length of cable that is needed to reach
from the tray to the devices
Step 2: Determine the length of cable that is needed to reach
from the tray to the devices (B).
Use provided clips beneath shelf to secure cables in
Use clips beneath shelf to secure cables.
D
Position #2
(B)
.
C, D, E
below).
TABLET (NO AC ADAPTER)
groups of 5-6.
TABLET (NO AC ADAPTER)
Positi
B
B
E
E