Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the handles
To allow power switch action by right hand, place the
handle with the switch trigger to the right side of the tool.
Place the other side handle to the left side of the tool.
1
2
013830
1
013829
Set both tops of the handles in the groove in the handle
holder, cover the handles by the handle clamp and then
secure it slightly by the hex bolts.
Adjust the handle to an angle that provides a
comfortable working position and then secure by firmly
hex bolts.
Installing the guard
WARNING:
Never use the trimmer without the guard in
•
place. Failure to do so can cause serious personal
injury.
013813
1. Handle clamp
2. Groove
3. Handle holder
4
4. Handle
3
1. Hex bolt
013839
Align the protrusions on the protector with the grooves
of the motor housing.
2
013838
Align the protrusions on the protector holder with the
concave portions of the motor housing. Insert the
protector holder to the motor housing.
1
013840
After attaching the protector and the protector holder to
the motor housing, tighten the hex bolts securely.
Installing the wire guard
CAUTION:
Before adjusting the wire guard, wait for the
•
cutting head comes to standstill. Do not adjust the
wire guard with your foot.
013843
10
1. Grooves
2. Protector
1
2
1. Concave
1
portions
2. Protector holder
3. Protrusions
3
1. Hex bolts
Publicidad
