Publicidad
Idiomas disponibles
Idiomas disponibles
Dimensions(L W H)
Operation Range
Alarm Setting Range
Operation Mode
Operating Temperature
Storage Temperature
BATTERY INSTALL AND REPLACEMENT
1.
Prepare 2 new coin cells of "CR2032".
2.
Loosen the 2 screws on the coin cell cover by a screwdriver.
3.
Replace the 2 coin cells (with the "+"sign facing upwards).
4.
Tighten the screws to fix the cover.
NOTE
1.
When cell capacity is low, the digits on the display will be not clear.
2.
Remove the coin cells if stored for a long period of time.
3.
Keep spare coin cells on hand when going on a long trip or to cold areas.
4.
Do not mix the type of coin cells or combine used coin cells with new ones.
5.
Sweat, oil and water can prevent a coin cell's terminal from making electrical
contact. To avoid this, wipe both terminals before loading a coin cell.
6.
Coin cell life depends on coin cell quality and the amount of buzzer is used.
7.
Dispose of coin cells in a designated disposal area. Do not throw coin cells into a
fire.
1English1
SPECIFICATIONS
Model Number
Drive
Voltage
Accuracy
CW
CCW
Resolution
Auto Shut-Off
Battery
Tool Weight
ASSEMBLY
ARM602-3
3/8" Square
3"
1-27/32"
1-29/32" (75 mm
¡
¡
±2 % form 20% to 100% of full scale
±3 % form 20% to 100% of full scale
3~59 ft-lbs (4~80 N-m)
6~59 ft-lbs (8~80 N-m)
1 kg-cm, 0.1 N-m, 1 in-lb, 0.1 ft-lb
After 60 seconds of No Use
Coin Cell CR2032 X 2
0.31 lbs (0.14 kg)
English
-7
6 Vdc
47 mm
¡
Peak / Trace
0-50°C
-10-60°C
48 mm)
¡
Publicidad
