Velleman RCQC3 Manual Del Usuario página 11

Fine-Tuning the Rotors
You can fine-tune the rotors in the unlikely case they should not turn at the same speed. To do so:
Push the fine-tune switch for the forward-
backward movement.
Switch off both the drone and the remote control and switch them on again. The rotors should be
synchronized. Please repeat if it is not the case.
11. Troubleshooting
No response from the quadcopter.

The battery of the quadcopter is insufficiently charged. Charge the battery.

The batteries of the remote control are insufficiently charged. Charge or replace the batteries.

The bandwidths of the remote control and the quadcopter do not correspond. Choose the
same bandwidth for both the remote control and the quadcopter by resetting and
synchronizing the remote control and the quadcopter.
The quadcopter is slow to respond or difficult to manoeuvre.

The battery of the quadcopter is insufficiently charged. Charge the battery.

The batteries of the remote control are insufficiently charged. Charge or replace the batteries.

The quadcopter is out of remote control's range. Do not fly the quadcopter too far from the
remote control. The range depends on the environment and surrounding objects.
12. Cleaning and Maintenance
The quadcopter does not need any particular maintenance. However, occasionally wipe it with a damp
cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents.
13. Technical Specifications
transmitter channels ............................................................................................ 4
control signal ............................................................................................. 2.4 GHz
material .......................................................................... plastic and electronic parts
power supply
quadcopter ..................................... rechargeable 3.7 V, 500 mAh lithium-polymer
...................................................................... (incl., spare battery: RCQC1/SP1)
transmitter ............................................................. 4 x 1.5 V AA/LR6C (not incl.)
charging time ........................................................................................ 45-60 min.
flying time ................................................................................................6-8 min.
control range .............................................................................................. ± 50 m
charging mode ......................................................................... via USB cable (incl.)
state of assembly ........................................................................ ready-to-fly (RTF)
transmitter mode ........................................................................................ mode 2
quadcopter dimensions ..................................................................... 32 x 32 x 8 cm
SD card ................................................................................ max. 32 GB (not incl.)
V. 01 – 11/07/2016
RCQC3
Push the fine-tune switch for the accelerator-
11
rotation movement.
©Velleman nv