Dolmar UV3200 Manual De Instrucciones Original página 10

• Switch off the motor and unplug:
– Whenever
machine unattended
– Before clearing a blockage
or any fault
– Before checking, cleaning or
working on the machine
– Before
adjustments,
accessories or storing
– When the machine hits a
foreign object. Wait until
the machine cools down.
Inspect the machine and
replace the parts if needed
before continuing operation
– Whenever
starts vibrating or making
noise unusually
– When attaching or removing
grass catcher
– When someone enters your
working area
– When crossing surface other
than grass
– When transporting.
• Stop the cutting tool:
– If you have to tilt the machine
– When crossing
other than grass
– Transporting the machine
to and from surfaces to be
worked.
• Pay attention to the cutting tools.
They do not stop immediately
after switch off.
10
leaving the
making any
changing
the machine
surfaces
Maintenance instructions
• Have your machine serviced by
our authorized service center,
always using
replacement
repair and poor maintenance
can shorten the life of the
machine and increase the risk
of accidents.
• Inspect the machine on regular
base.
• Before servicing,
adjustment,
change an
following steps:
– Shut off the power source
– Disconnect
from power supply
– Make sure that all moving
parts have
complete stop
– Allow the machine to cool.
• Inspect on the machine for
possible damage:
– Whether
works properly
intended function
– Whether all the moving
parts work smoothly and
adequately
– Whether all parts are not
damaged
installed
– Check the cutting tool for any
damage, worn or unbalance
only genuine
parts. Incorrect
inspection,
storage, or
accessory, take
the machine
come to
safety devices
for
and properly
to
a
its