Beamz MHL90 Manual De Instrucciones página 9

C. MASTER/SLAVE MODE
Connect the lights in series, the first light controls the other lights when an auto show or sound controlled show is running on
the first light. It's very good for the instant show mode.
Connect a DMX cable between the 1
 Choose option
 Then choose the desired show mode in MENU
 On the 2
nd
and next lights choose option
option (Slave 2) running against the master light in the MENU
 After desired option is chosen, press ENTER button to confirm. The slave lights will now follow the master light
SETTINGS
1. Sound control sensitivity
choose , press ENTER button to confirm. Press UP/DOWN to adjust，the sensitivity value from
chosen, press ENTER button to save.
2. LED display auto off
Choose , press ENTER button to confirm. Press UP/DOWN button to choose
After chosen, press ENTER button to save.
to main menu.
3. LED display inversion
Choose , press ENTER button to confirm, then enter the
mode. After 10seconds or press MENU long time to return to main menu.
4. Pan reverse
Choose , press ENTER button to confirm. Press UP/DOWN button to choose
reverse direction) mode. After chosen, press ENTER button to save.
5. Tilt reverse
Choose , press ENTER button to confirm. Press UP/DOWN button to choose
reverse direction) mode. After chosen，press ENTER button to save.
6. Test mode
Press MENU button to
to back to main menu.
7. Working time
Press MENU button to
menu.
8. Software version
Press MENU button to
menu.
9. Reset
Press MENU button to
st
light (DMX OUT) to the 2
in MENU, select (Master) on the master light (1
(Slave 1) running same as the master light, or
, press ENTER button, the led display will strobe, the light will run built in program, press MENU
, press ENTER button, the led display could show the working time, press MENU back to main
, press ENTER button，the led display will show the program version, press MENU back to main
, press ENTER button, program enter auto reset function.
nd
light (DMX IN) etc.
st
light in serie)
(ShowMode) (1, 2, 3 or 4
(inversion), after chosen, press MENU to enter the
to . After
(light up) or (light off) mode.
(Pan direction) or (Pan
(Tilt direction) Or (Tilt
9