Ryobi RBL30MVA Manual De Utilización página 12

GB
F D E
SERVICE
Servicing requires extreme care and knowledge and
should be performed only by a qualified service technician.
For service we suggest you return the product to your
nearest AUTHORIZED SERVICE CENTER for repair.
When servicing, use only identical replacement parts.
WARNING
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly
and understand completely the operator ʼs
manual. Save this operatorʼs manual and review
frequently for continuing safe operation and
instructing others who may use this product.
SAVE THESE INSTRUCTIONS.
FEATURES
PRODUCT SPECIFICATIONS
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5 kg
Engine displacement . . . . . . . . . . . . . . . . . . . . . . . 30 cc
Air Velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 km/h
Air Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 m
Sound power level . . . . . . . . . . . . . . . . . . . . . . 110 dB(A)
Sound pressure level . . . . . . . . . . . . . . . . . . . . .95 dB(A)
Maximum engine performance . . . . . . . . . . . . . . .0.75 kw
Maximum rotational frequency
of the engine. . . . . . . . . . . . . . . . . . . . . . . . . . . 8500 /min
Engine speed at idling . . . . . . . . . . . . . . 2800~3500 /min
Fuel consumption at max. engine
performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 L/h
Fuel tank volume . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.4 L
Mulch ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:1
Equivalent vibration total value (according to PrEN 15503
Annex B)
Blowe Front handle..................................1.9 m/s²
Rear handle...................................3.4 m/s²
Vacuum Front handle..................................2.3 m/s²
Rear handle...................................3.1 m/s²
Leaf bag capacity . . . . . . . . . . . . . . . . . . . . . . . . . . 40 L
DESCRIPTION (Fig. 1)
1. Rear handle
2. Throttle
3. ON/OFF switch
4. Cruise control
5. Front handle
6. Handle knob
7. Blower tube
8. Vacuum bag
9. Blower / Vac mode switch
10. Fuel cap
11. Starter grip
12. Shoulder strap
13. Primer bulb
ASSEMBLY
I P NL S DK N FIN GR HU CZ RU
English English
ASSEMBLY
(Fig. 2)
NOTE: Read and remove all hang tags and store with
your Operatorʼs Manual.
3
/min
OPERATION
MIXING THE FUEL (Fig. 3)
This product is powered by a 2-stroke engine and
■
requires premixing petrol and 2-stroke lubricant. Pre-
mix unleaded petrol and 2-stroke engine lubricant in a
clean container approved for petrol.
This engine is certified to operate on unleaded petrol
■
intended for automotive use with an octane rating of
87 ([R + M] / 2) or higher.
Do not use any type of pre-mixed petrol/lubricant
■
from fuel service stations, this includes the pre-
mixed petrol/lubricant intended for use in mopeds,
motorcycles, etc.
Use synthetic 2-stroke lubricant only. Do not use
■
automotive lubricant or 2-stroke outboard lubricant.
Mix 2% synthetic 2-stroke lubricant into the petrol.
■
This is a 50:1 ratio.
Mix the fuel thoroughly and also each time before
■
fueling.
Mix in small quantities. Do not mix quantities larger
■
than usable in a 30 day period. A synthetic 2-stroke
lubricant containing a fuel stabiliser is recommended.
9
9
RO PL SLO HR TR EST LT
WARNING
If any parts are missing do not operate this tool
until the missing parts are replaced. Failure to do
so could result in possible serious personal injury.
WARNING
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
WARNING
Stop the engine and disconnect the spark plug
wire before installing parts, making adjustments,
cleaning, or when not in use. Failure to do so
could result in possible serious personal injury.
WARNING
Petrol is extremely flammable and explosive.
A fire or explosion from gasoline will burn you
and others.
LV SK BG