Publicidad
Idiomas disponibles
Idiomas disponibles
CONVERSION
INSTRUCTIONS
810-9520-S
CAUTION: Some parts may contain sharp
edges. Wear protective gloves if necessary.
Note:
Make sure all control knobs are in the
off position, LP tank valve is closed
and tank is disconnected from
regulator and removed from grill.
Step 1
Using an adjustable wrench to hold the gas
manifold connection secure, use a 3/4" wrench
to loosen the hose connection nut. Replace
existing LP hose/regulator assembly with
natural gas 10' hose assembly. Tighten the
connection carefully using two wrenches.
Step 2
Remove cotter pin from side burner "foot".
Carefully lift side burner up and away from valve
nozzle. Set aside for later use.
Cotter Pin
Step 3
Open hood and remove warming rack, cooking
grills and heat shields. Set aside for later use.
5
Gas Manifold Nut
10' Natural Gas Hose
Warming Rack
Cooking Grills
Heat Shields
Publicidad
