Publicidad
Idiomas disponibles
Idiomas disponibles
Care & Cleaning
1. Make sure your Portable Induction Cooker is unplugged and allowed to cool
completely before cleaning.
2. Wipe cooktop surface with a soft, damp cloth. If further cleaning is needed,
you can clean it with a mixture of water and mild detergent. Dry
thoroughly. Never immerse induction cooker, cord or plug in water or
any other liquid.
3. Do not use abrasive cleaners or scouring pads that can scratch the surface.
Storage
For your convenience, the power cord can be stored using the hook & loop strap
that is attached to the cord wrap.
10
www.oster.com
CKSTPIC1000_15ESM1.indd 11-12
Troubleshooting
Problem
Possible Cause
Cooktop does not work after
Cooktop is not plugged in.
pressing the I/O (on/off)
button.
I/O (on/off) button was not
held long enough.
Cooktop keeps beeping and
The cookware is not
power level keeps blinking on
induction ready.
LED display after placing pot
on cooking area/zone.
Cookware is too big or too
small.
The bottom of the cookware
is not flat.
I can still hear the fan
Even after turning off the unit,
running, after turning the
the internal fan keeps running
unit off.
for a few seconds to finish
cooling down the interior of
the Induction Cooker.
There are scratches on the
Cookware used has rough
cooktop surface.
bottoms that can damage
the cooktop surface.
www.oster.com
Solution
Make sure cooktop is plugged
in, if not plug into wall outlet.
Press and hold I/O (on/off)
button until display changes to 0
Check that the cookware you
want to use is induction ready
by placing a magnet on its
bottom. If the magnet does
not stick, the cookware will
not work. Try a different pot.
Verify that bottom of cookware
does not measure less than 5.5
inches and no more than 7
inches in diameter.
All cookware used on the
Portable Induction Cooker must
have a completely flat bottom.
This is normal. The fan will
turn off by itself after the
cooling process is complete.
Use cookware with smooth,
flat bottoms.
11
7/10/15 8:55 AM
Publicidad
