N'oveen IWH150 Manual Del Usuario página 11

heating element.
 If the power cord is damaged, replace the damaged cord by qualified personnel or a
specialized service center.
 When using an electric heater, do not use other electrical devices connected in the same
high-power electric circuit (eg air conditioning, induction cooker, electric kettle, etc.). The
socket must not be connected to any other heavily loaded connections.
 This device is not intended for use by persons (including children) with reduced physical,
sensory or mental abilities or with lack of experience and knowledge, unless supervision
or instructions regarding use of the device by a person responsible for their safety have
been given.
 Children should be supervised to make sure they do not play with the device
Preparations for assembly
Since the battery power is high, check the fuse. The maximum load of the fuse should meet the
demand for the rated current of the battery.
Make sure that there is a ground wire in the base of the electrical outlet.
Before use, check that the actual voltage corresponds to the voltage marked on the battery. If
you are not sure about these parameters, contact a person with electrical qualifications to verify
the electrical installation.
Installation methods
1. The method of wall mounting is shown in picture 1:
1 Nozzle
2 Main body
3 Knob
4 City water pipe
5 Connecting nut
6 Connecting screws
7 Power line
8 Wash basin
11