Progress Lighting AirPro P250020 Manual De Instalación página 13

Speed settings for warm or cool weather depend
on factors such as room size, ceiling height,
number of fans, and so on.
The fan shipped from the factory with the
reversing switch positioned to circulate air
downward. If airflow is desired in the opposite
direction, turn your fan off and wait for the
blades to stop turning, then slide the reversing
switch (located at the top of the motor housing,
refer to figure 7 on page 4) to opposite position,
and turn fan on again. The fan blades will turn
in the opposite direction and reverse airflow.
Remote Control - Your fan is equipped with a
remote control to operate the speed and lights
(Figure 18).
LIGHT / DIMMER button = Light On/Off and
dimmer
LO button = Low speed
MED button = Medium speed
HI button = High speed
FAN OFF button = Power off
LIGHT /DIMMER
LO MED HI
FAN OFF
R
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in Figure
19. This allows you to set your air conditioner
on a higher setting without affecting your
comfort.
Cool weather - (Reverse) An upward air flow
moves warm air off the ceiling are as shown in
Figure 20. This allows you to set your heating
unit on a lower setting without affecting your
comfort.
Figure 18
10. Operating Your Fan
Figure 19
Figure 20