Philips Sonicare DiamondClean Smart HX9917/88 Manual página 16

16
English
b. Pressure sensor
time feedback while brushing, informs you if you
missed any spots when brushing, tracks your brushing
behavior over time and provides useful tips and tricks
for your healthiest mouth ever. In order to fully benefit
from your Philips Sonicare, we advise you to follow
these steps:
Connecting your toothbrush
Download the Philips Sonicare app from the Apple
1
App Store or Google Play Store.
2 Confirm Bluetooth is switched on on your mobile
device before you open the app. Check the
settings on your mobile device to switch on
Bluetooth.
3 Open the Sonicare app.
4 To connect the toothbrush to the app, remove the
handle from the charger and press the
mode/intensity button.
5 Follow the Sonicare app instructions displayed on
your mobile device. The app automatically
connects with the toothbrush. If the toothbrush
does not connect, follow the troubleshooting steps
provided in the app.
Note: For optimal data capture, keep your mobile
device close during brushing.
Your Philips Sonicare is equipped with an advanced
sensor that measures the pressure you apply while
brushing. If you apply too much pressure, the
toothbrush will provide immediate feedback to
indicate that you need to reduce the pressure. The
feedback is given in two different ways:
You experience a change in vibration and therefore
1
brushing sensation.
2 The pressure warning light of the light ring will light
up purple.
If you receive a warning, reduce the pressure. The light
will turn off and the brushing sensation will adjust to
the original sensation.