Go Rhino 920600T Instrucciones De Instalación página 4

INSTALLATION INSTRUCTIONS
STEP # 1
• Unplug the 5 rubber caps from the front tube of your sport bar 4.0 (sold separately). This
will uncovered the rivet nuts for the installation. Also unplug the ¾" rubber from the left
side.
STEP # 2
• Install the LED lights using the hardware provided by the LED light maker. You can use the
different holes in the spoiler, look for the configuration that works the better for your
lights.
REV.01
A
© 2016 Go Rhino Products. All rights reserved
4